Requirements for silicone accessories
Time：
2023-06-05 18:08
Source:
多行文本内容元素
富文本内容绑定数据后可解析HTML语言内容
Now some rubber parts in various industries are used more, and silicone rubber accessories are more prominent than ordinary rubber material performance, our common sealing rings, buffers, shock absorbing equipment are many are replaced by silicone products, but silicone materials also have different quality problems, so in the process of use we need to pay attention to what performance!
1. Silicone accessories are widely used, many products need to work 24 hours a day, so wear resistance is very important, good silicone material can be used normally for more than 30,000 hours under stress, and the appearance will not be cracked and worn.
2. Elasticity is the basic principle of silicone material, silicone has more than 120 pull-up elasticity, so in the process of use, the elasticity is not good, and the lack of rebound can reflect the quality of silicone rubber products!
3. High tear strength is also the core element of silicone accessories, that is, whether the life of use is normal, the tear degree can be found and tested at the corner of the product, and the tensile stress will not be broken. Fatigue aging appears, and the properties of the product begin to decline during long-term use, such as elasticity, color, shape, etc., resulting in the loss of performance of silicone products.
For the use of silicone accessories in the process of different problems are dependent on the silicone products manufacturers used in the deployment of raw materials up to standard and the molding process of the machine and personnel cooperation, etc., so in the use of the process to see whether the product belongs to the standard products can be tested from the above points, so as to avoid different abnormal problems in use!
Related News
Requirements for silicone accessories
Now some rubber parts in various industries are used more, and silicone rubber accessories are more prominent than ordinary rubber material performance, our common sealing rings, buffers, shock absorbing equipment are many are replaced by silicone products, but silicone materials also have different quality problems, so in the process of use we need to pay attention to what performance!
Special rubber material introduction -- Chlorosulfonated polyethylene rubber (CSM)
Chlorosulfonated polyethylene (alias: Hypalon) is a type of special rubber prepared by chlorination and chlorosulfonation of polyethylene. After the chlorination and sulfonation of polyethylene, the regularity of its structure is destroyed, and it becomes a soft and elastic chlorosulfonated polyethylene rubber at room temperature.
Application and development trend of thermal conductivity absorbing materials
These waste heat will increase the temperature of electronic equipment, resulting in reduced stability of equipment performance, and even damage to the entire system, which will seriously cause accidents such as equipment fire, at the same time, if the heat dissipation is not in place, it will greatly reduce the service life of electronic equipment.
Ksas (Dalian) New Materials Products Co., Ltd.
-
Add：6-2, No.1 Liaohe Middle Second Road, Dalian Economic and Technological Development Zone
Email：ll@dlksas.com
Email：sales@dlksas.com
Http：www.dlksas.com
Copyright © 2024 Ksas (Dalian) New Materials Products Co., Ltd.
